Kodak Mini Latch
by bloucks, published
Replacement latch for Kodak mini digital camera
To remove the old broken latch, you will need to press out the pivot pin with a map pin.
Print as a solid. The hole for the pivot pin may not print, but you can set the latch in location and use a heated needle to create a hole. The plastic may extrude into the camera's pivot pin hole, which will make it work without replacing the pin.
Liked ByView All
Give a Shout Out
Kodak Mini Latch by bloucks is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving bloucks a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure bloucks would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).