Multicopter electronics protection dome
by lobster2b, published
This is a dome that covers and protects your valuable electronics, in case of crash, the dome shields the electronics from damage.
The file is parametric
4x 3mm nuts
4x 3x10mm bolts
1x printed sphere
Use 4 3x10 mm bolts, insert into holes from inside the dome, use nut on the outside.
Place ontop of quad.
Take rubberband and put the arm inside, so the loop go around the arm and over the bolt
Liked ByView All
Give a Shout Out
Multicopter electronics protection dome by lobster2b is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure lobster2b would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).