Reusable spud gun ammo
6
Likes
101
Downloads
616
Views
Published on January 24, 2013
Description
For use in potato cannons
Instructions
Scale to 0.5mm smaller than the inside diameter of your barrel (my barrel is 64mm so the spud is currently 63.5mm wide.
The heavier the projectile is the further it will fly.
I printed with 3 shells and 10% infill
This is a good how to video but there are many on youtube
youtube.com/watch?v=ykF3TUTI2hU
I made a 6 foot cannon out of 70mm drain pipe and 120mm soil pipe that can shoot a tennis ball 300 meters on a good day
Be safe and have fun
The heavier the projectile is the further it will fly.
I printed with 3 shells and 10% infill
This is a good how to video but there are many on youtube
youtube.com/watch?v=ykF3TUTI2hU
I made a 6 foot cannon out of 70mm drain pipe and 120mm soil pipe that can shoot a tennis ball 300 meters on a good day
Be safe and have fun
You must be logged in to post a comment.
More from Thingimijig
More from Sport & Outdoors
I tried to print this several times and it does not finish the print. i get an error in makerware saying there was a problem silcing the model. I've not had this before with anything else i've printed.
any suggestions?