Fire Plug
8
Likes
521
Downloads
565
Views
Published on January 24, 2013
Description
A non scale impression of a Fire Plug.
I made this for a friend, who is a photographer and who's 2012 subjects were Fire Taps and Fire Plugs.
As we do not have these infrastructure in The Netherlands, I made my own design, after having seen some on pictures
Thomas
I made this for a friend, who is a photographer and who's 2012 subjects were Fire Taps and Fire Plugs.
As we do not have these infrastructure in The Netherlands, I made my own design, after having seen some on pictures
Thomas
Instructions
This is a model to be assembled.
There are 2 options, either the small turret-shaped Plug, or the one with the multiple hose connectors.
Items to be glued onto each other with cyanoxx (watch out!).
Don't print the assembly, it is for documentation purpose. (However, it might print if you are supportive :-)
Pint one of the Basis and one of the Top
Print two of the Midden, two of the Side-big and two of the Side-smal.
The little caps (of the Side sets) go into the side caps.
Both MIDDEN on top of each and glue the basis and top on each side.
Glue the caps on the ends of the MIDDEN piece.
There are 2 options, either the small turret-shaped Plug, or the one with the multiple hose connectors.
Items to be glued onto each other with cyanoxx (watch out!).
Don't print the assembly, it is for documentation purpose. (However, it might print if you are supportive :-)
Pint one of the Basis and one of the Top
Print two of the Midden, two of the Side-big and two of the Side-smal.
The little caps (of the Side sets) go into the side caps.
Both MIDDEN on top of each and glue the basis and top on each side.
Glue the caps on the ends of the MIDDEN piece.
License
Fire Plug by 3daybreaker is licensed under the Attribution - Share Alike - Creative Commons license.
More from 3daybreaker
More from Buildings & Structures
You must be logged in to post a comment.