Gripper for Multirotor
by djmad, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a Gripper to recue Crashed Airplanes on our Airfield via a Octacopter without having to call the local farmers every time we crash :-)
Possible to reduce the Thinkness of the gripps, but my copter can lift +3kg so no need atm
The 2 gripps print by fdm prozess with support than grind out the middle section of the gears
the other pieces should be fine without support
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Gripper for Multirotor by djmad is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving djmad a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure djmad would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).