Prusa Mendel on a single plate by kliment

Prusa Mendel on a single plate

kliment

Likes

912

Downloads

1881

Views

Published on October 13, 2010

Derived from

Prusa simplified mendel

by prusajr

Description

All the parts for a Prusajr Mendel are in plate1 except for the PLA bushings. The bushings must be printed in PLA, the rest may be printed in either ABS or PLA. Printable in one go on a Mendel or similar-sized printer. The vertices have rafts between them so they can be stacked and separate cleanly. UPDATE UPDATE UPDATE: Improved parts, fixed errors, made all parts parametric. Source is at github.com/prusajr/PrusaMendel .

Instructions

Make sure that your printer has 200x200 active area. Detailed build instructions are at reprap.org/wiki/Prusa_Mendel

Tags

This Thing has no tags.

Report as inappropriate

jjhcs1 on February 1, 2013 said:

My Carrage Melted but using my Heat gun and my Bed I flattened it out better then it was Originally now I get a perfect print every time but I know this PLA carriage will not stand up forever Dose Anyone Know where I can get that exACT carriage???

jjhcs1 on February 1, 2013 said:

He I have the Prusa Mendel Basic Design No bottem Z axes bearing and No buffer springs.... Any Idea how I get the exact copy of My Parts? Pain in the Ass having to send away for parts. I just got mine working Yesterday and I have been printing xcarrages and Wade bodies...ever since;-)

Anonymous on November 29, 2011 said:

Out of curiosity, does the plate contain the parts for the wades nema 17 geared extruder? Or is it necessary to print that separately?

kliment on November 29, 2011 said:

Hey! This is now out of date. PLEASE use the plates from Prusajr's github instead, or you'll be missing out on all of http://blog.reprap.org/2011/11...

Anonymous on February 11, 2011 said:

Wow, I just loaded it. Great job fitting it all on one plate!

kliment on February 11, 2011 said:

Thank you, but please note this is now out of date. The latest one, which is on prusa's github, contains the extruder on the same plate as well, and multiple parts improvements. To get the very latest, download the zip from github and run "make mendelplate" (if you have make and openscad installed). Either way, don't print the thingiverse one.