Loading

2.1mm Power Jack Housing

by ecafruoy, published

2.1mm Power Jack Housing by ecafruoy Jan 24, 2013

Description

A power jack boot I designed in sketchup cuz I needed one.
SKETCHUP FILE INCLUDED

Recent Comments

view all
I filled the boot cavity with cheapo silicone caulk to make the rig a bit moisture resistant and that added some strain relief. But have at the sketch up file... I haven't had any of my objects made by others yet, let alone modified and reuploaded.
Nice. You might want to incorporate an additional S-shape or a boss to help resist pulling the cord out of the boot.
Perfect timing. I just bought a lot of these off of ebay. Thanks!

More from Parts

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

A height of 14mm fits a standard 2.1mm solder mount power jack.
The top can be secured via glue, pop rivet, screw, heat shrink tube or a combo of these.
Nice. You might want to incorporate an additional S-shape or a boss to help resist pulling the cord out of the boot.
I filled the boot cavity with cheapo silicone caulk to make the rig a bit moisture resistant and that added some strain relief. But have at the sketch up file... I haven't had any of my objects made by others yet, let alone modified and reuploaded.
Perfect timing. I just bought a lot of these off of ebay. Thanks!
Top