by DanLuc, published
This box has a lighter wall then some of the popular ones but still very strong. The lid has tabs so you can grab it and open it eassier and then there is the obvious text.
I didn't use any support material not even for the text hence why it looks a little stringy inside.
I removed the iner part from the A and R to make it eassier to print. You can add those back by deleting that mod in the SW file. Also you can change the text around as you see fit.
I printed it with 30% infill and was plenty strong. Keep in mind the less infil you have the more layers are required on the top in order to have a smooth layer. Mine was 10 solids on the top and bottom I think.
Thanks about it. Thnaks
Liked ByView All
Give a Shout Out
Sugar Box by DanLuc is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure DanLuc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).