Camera mount for Celestron CG-5
0
Likes
62
Downloads
426
Views
Published on January 27, 2013
Description
Astrophotography camera adaptor for Celestron CG-5 equitorial goto mount
Instructions
Print with ~70% infill.
A 1/4-20x5/8" hex head bolt goes through hole in bottom. (The part builds bottom-side-up.) Add one or two washers to fit the camera without bottoming. Make sure the bolt head doesn't extend past the bottom surface.
A thin sheet of PSA backed rubber sheet can be added to the top surface between the part and the camera body to protect the camera and prevent slippage.
A 1/4-20x5/8" hex head bolt goes through hole in bottom. (The part builds bottom-side-up.) Add one or two washers to fit the camera without bottoming. Make sure the bolt head doesn't extend past the bottom surface.
A thin sheet of PSA backed rubber sheet can be added to the top surface between the part and the camera body to protect the camera and prevent slippage.
License
Camera mount for Celestron CG-5 by teravolt is licensed under the Creative Commons - GNU GPL license.
You must be logged in to post a comment.