Loading

Galaxy S3 Stand

by ark19, published

Galaxy S3 Stand by ark19 Jan 27, 2013

Description

Designed this S3 stand as I wanted a stand that can hold the S3 vertically while it's charging. It can be used to hold it horizontally as well.

Recent Comments

view all
S3 mini dimensions are pretty close to S3 for the thickness. For the width, I made it wider as I'm using a case with cutouts for the volume rocker switch, if the width is smaller, the buttons will be touching the stand surface. could you try using the v3 stl to print first? Let me know which dimensions that need to be changed. Thanks.
Thanks for the suggestion fma, I initially did not want to do that as it might be stressing the cable. Added a V3 file with a hole for the USB cable.

More from Mobile Phone

view more

Makes

Liked By

view all

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Print with 0.2mm layers. The top of the holes collapsed but Rep2 managed to continue to print successfully. The based warped slightly, but I can live with it :)

Added a V3 file which includes a thru hole for the USB cable.

My wife made a suggestion: it would be nice to have the groove going below the support, to the back, so the cable can be totally hidden...
ark19 - in reply to fma
Thanks for the suggestion fma, I initially did not want to do that as it might be stressing the cable. Added a V3 file with a hole for the USB cable.
Does it need to be attached to the table (I can see screw holes), or can it be used 'floating'? Could you post source files? I would like to adapt it for my wife's S3 mini..
ark19 - in reply to fma
Hi fma, the "Holes" are for reducing materials used, you do not need to mount it to the table. I used Alibre to design the stand. Which file format do you need? If you let me know the required width, I can add another version for you.
fma - in reply to ark19
Thanks! I have to find the dimensions of the S3 mini; I'll post them as soon as I get them.
ark19 - in reply to fma
S3 mini dimensions are pretty close to S3 for the thickness. For the width, I made it wider as I'm using a case with cutouts for the volume rocker switch, if the width is smaller, the buttons will be touching the stand surface. could you try using the v3 stl to print first? Let me know which dimensions that need to be changed. Thanks.
fma - in reply to ark19
Thanks!
Top