Open Source Hardware Logo
by botdream, published
This is my first attempt to make a 3d object using OpenSCad, InkScape, so decided to make this 8x8cm OpenSoftwareHardware logo.
Internal Legend turned out to be a bit to thin so that it could fit the logo, may need some extra cleaning, since I used this to fill with extra material it turned out to be fine.
Used an Ultimaker printer with this configurations:
Layer height: 0.2mm
Wall thickness: 0.8mm
Fill Density: 30%
There are also additional OpenSCad and InkScape files available.
Additional help on how to tweak InkScape vectorial files and export them to be used in OpenSCad here: