Loading

BallJoint to Tube - Coupling

by mechadense, published

BallJoint to Tube - Coupling by mechadense Jan 27, 2013

Description

To mount electronic devices like Garmin navigation computers to bike handlebars. *.stl files: For 22mm tubes. The ball has 17.5mm diameter.

Recent Comments

view all
Well, sometimes you hold the bar so much that you do not necessarily fly OTB... I even badly dislocated my thumb on the first time I fell off my (road) bike.
And you could break your device! :D
Haven't thought about this.
At least It's flat with the Device mounted.
And in a hopefully never occurring frontal crash you'll leave the hole bike behind since if the deceleration acts on your whole body.
Don't you fear punching your head in case of an accident?
I would probably attach it somewhere else, or with such an angle that it would rotate on the handlebar if I fall on it. Keep your head for more designs ;)

More from Computer

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

You need M6 threaded rod. Cut a thread into the ball and use self locking nuts for assembly. Polish the ball with wet sanding paper and electric screwdriver. Save $$

Don't you fear punching your head in case of an accident?
I would probably attach it somewhere else, or with such an angle that it would rotate on the handlebar if I fall on it. Keep your head for more designs ;)
Haven't thought about this.
At least It's flat with the Device mounted.
And in a hopefully never occurring frontal crash you'll leave the hole bike behind since if the deceleration acts on your whole body.
Well, sometimes you hold the bar so much that you do not necessarily fly OTB... I even badly dislocated my thumb on the first time I fell off my (road) bike.
And you could break your device! :D
Top