Roll Cage Swivel Mount for GoPro

by FluidDoc, published

Roll Cage Swivel Mount for GoPro by FluidDoc Jan 28, 2013

Thing Info

6243Views 984Downloads Found in Camera
Report Thing


This is an alternative to GoPro's roll bar mount, which has huge posts sticking out the back and does not have the necessary degrees of freedom to get the camera level on an angled bar, such as the A-pillar. This addresses both of those issues by using zip ties to secure it and adding a swivel to account for skewed angles. Sized to fit a 1.75 inch tube, although slightly smaller or larger should still work fine.


I thought I may need something to keep the mount from twisting on the tube or swiveling on it's own, but with a couple of tight zip ties, it is extremely sturdy.

More from Camera

view more

Thing Info

6243Views 984Downloads Found in Camera
Report Thing


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

All Apps

This extension connects Thingiverse with Makeprintable, a cloud-based mesh repair service that analyzes, validates and repairs most common mesh errors that can occur when preparing a 3D design file...

App Info Launch App

This mount is great! Survived 3 autocrosses and the Thompson World Series, rock steady video. I would advise printing any end-use parts like this from Nylon, it won't crack like PLA or ABS.

Awesome. This one has survived 14 hours at Road Atlanta, and 6 at Charlotte Motor Speedway. 24 hours at VIR coming up in a few weeks!

I noticed one fault so far: The "prongs" printed in this orientation can break very easily when there is no gopro case connected. No problem when it's all together though.

I used this during my first 24 Hours of Lemons race and it worked like a charm. Thanks for sharing!