Printrbot Extruder Nozzle Caddy
by Michele31415, published
A simple caddy to securely store spare extruder nozzles right on the printer deck. This is designed for the Printrbot+.
Print the caddy. It is designed to mount to any of the four corners of the top deck using the two existing bolts there. Since the mounting ears are the same size as the existing washers, you can use the same bolts already there. Can also be printed without the mounting ears for gluing in place. Nozzles just drop into the hex-shaped wells. The well size can be made slightly smaller to make a snugger fit. It's designed for the Printrbot+ but may fit the LC and regular Printrbot too - I don't have one of those so I can't tell.
This is my first Thingiverse design.
Liked ByView All
Give a Shout Out
Printrbot Extruder Nozzle Caddy by Michele31415 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Michele31415 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Michele31415 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).