Printrbot LC Extruder Locking Plate with Filament Guide LC
by Fruktodlaren, published
This is a derivative of Jerrill's printed filament guide for the wooden extruder. The only difference is that this one is laser cut from the same material that the rest of the printrbot is cut from and that it is slightly taller to make room for the captured M3 nut that holds it together.
1x flathead M3x10 screw
1x M3 nut
Plywood 5,6mm thick (mine was from a plywood box bought at IKEA, named "PrÃ¤nt")
Assemble the two parts with the M3 screw and nut. Then replace the locking plate on your existing wooden extruder with this part.
The .ipt files and .iam file are Autodesk Inventor files. They are a bonus for those who use Autodesk Inventor to double check their designs in 3D before building them. You don't need them to cut this thing, you are fine with just the .dxf-file.
Liked ByView All
Give a Shout Out
Printrbot LC Extruder Locking Plate with Filament Guide LC by Fruktodlaren is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Fruktodlaren a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Fruktodlaren would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).