Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Wonton Waste-bin
25
Likes
265
Downloads
759
Views
Published on January 28, 2013
Description
This is a waste-bin lid for your old take-out soup containers. I frequently use them as little desktop trash for post-its and support material.
Instructions
Print the bottom, the lid, and 2 pins.
Enjoy.
P.S. - works, but I am going to make some tweaks in the near future hence the "work in progress"
Enjoy.
P.S. - works, but I am going to make some tweaks in the near future hence the "work in progress"
You must be logged in to post a comment.
cordawg92
on
March 24, 2013
said:
What did you print this on? And how did you get it to print with the STL files positioned sideways?
areeve20
on
March 25, 2013
said:
I printed on my Afinia H-Series with ABS. I have been meaning to re-print because at the time I was using a filament with a slightly different melting point and I think my nozzle was too hot.
I don't know why the file images are rotated, thats not how I made them. I printed all the pieces in the orientation they would be used. If they come into your printing program on their sides (as pictured) it should be simple enough to just rotate them 90degrees on the appropriate axis.
License
Wonton Waste-bin by areeve20 is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from areeve20
More from Organization
What settings did you use to print this? I printed one on my Afinia and had to scale up the pins 10% so that they were big enough to work. But maybe your print settings were different.