Customizable Round Foot for Bolt and Square Nut
by wd5gnr, published
This is derived from the #6 foot for PCB I made earlier but is customizable.
Fill out the form. Make sure the bolt hole is shorter than your actual bolt so the nut can engage. That's it.
You can find tap hole tables on Google to determine the size of a clearance hole and/or the dimensions of the square nut size you want to use.
For example, a #6 bolt is 3.7mm and the nut is 7.9375mm.
Liked ByView All
Give a Shout Out
Customizable Round Foot for Bolt and Square Nut by wd5gnr is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving wd5gnr a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure wd5gnr would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).