Build Plate Leveler for The Replicator 2
by Beskytt, published
Woodsmoke made a super cool build plate leveler, but it was a bit small for the Replicator 2, so I stretched it!
From Woodsmoke's original thing:
Larger and more complex parts require greater accuracy in 3d printer calibration, especially with regard to laying down the first layer. This calibration part will help you ensure your print head is always the right height above your built plate, regardless of where it is in the XY plane.
A level build plate seems to be the result of a skill you develop the more you use your 3d printer. Using a calibration print allows you to achieve greater accuracy than with a spirit level or the human eye.
Remember to print this part at the lower end of your polymer's temperature range. Very runny PLA is more forgiving of miss-calibrated build plates.
- Print it!
- Adjust your platform accordingly!
- Repeat until awesome!
Liked ByView All
Give a Shout Out
Build Plate Leveler for The Replicator 2 by Beskytt is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Beskytt a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Beskytt would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).