Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Strap Clamp Corner Bracket
1
Likes
69
Downloads
424
Views
Published on January 31, 2013
This thing can be customized with MakerBot Customizer!
Open in Customizer
Description
Have a large woodworking project and not enough pipe clamps to hold it together?
Simple Ratchet straps can work. Here is a parametric corner bracket to make strap clamps work well.
This thing features a glue expansion area in the corner so you don't glue your clamp to your work. It can hook over your strap so it won't fall while you are positioning all of your parts and clamps. It can also be made for many of your common angles for more than just a 4 sided box!
Simple Ratchet straps can work. Here is a parametric corner bracket to make strap clamps work well.
This thing features a glue expansion area in the corner so you don't glue your clamp to your work. It can hook over your strap so it won't fall while you are positioning all of your parts and clamps. It can also be made for many of your common angles for more than just a 4 sided box!
Instructions
Take some measurements of your strap & key them in.
Set your angle & print one. If it's how you like it, print the other three.
I have to work out some issues for the non-90 degree angles. It's usable, just not as pretty as it should be.
Set your angle & print one. If it's how you like it, print the other three.
I have to work out some issues for the non-90 degree angles. It's usable, just not as pretty as it should be.
License
Strap Clamp Corner Bracket by creuzerm is licensed under the Attribution - Creative Commons license.
More from creuzerm
More from Hand Tools
You must be logged in to post a comment.