TomTom 310 XL Bicycle Stem Mount
by Glitch3DModels, published
Love cycling but don't know where you are going? Solution: Bring your GPS with you. Specifically a TomTom XL310 or similar. Uses zap straps for attachment.
Download, Slice, Print. No supports, minor bridging, big flat bottom. Got bed stick issues? No problem, warping won't affect the usefulness. Does your printer oversize everything? Whatever, call it an "interferance fit." Scale the model slightly if needed.
Please use a strong elastic band or similar to hold the GPS in place, just in case
-The hole in the bottom is useless due to the angled plug.
-You can stick your TomTom in upside down if you prefer for mounting, but you'll have to take it out to turn it on/off.
-SolidWorks file contains a modeled TomTom 310 XL for making other mounts, please note this thing in your derivation.
Liked ByView All
Give a Shout Out
TomTom 310 XL Bicycle Stem Mount by Glitch3DModels is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Glitch3DModels a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Glitch3DModels would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).