Parametric endstop holder (mendel)
by gringer, published
Parametric version of mendel microswitch endstop holder, with most things changeable.
Print out the STL file, attach to your axles with an M3 bolt, attach to your microswitches with screws, and hope that your printer will work better now you're not using tape.
If needed, change the parameters of the SCAD file and recompile. Here are the current settings in SCAD file:
bw = 5; // bracket width
bh = 10; // bracket height
cl = 15; // clamp length
ad = 8; // axle diameter
hd = 3; // bolt hole diameter
nd = 6; // bolt nut diameter
mhd = 2.5; // microswitch hole diameter
ai = 0.75; // axle inset for clamp
xw = 0.4; // extrude width
mhs = 9.5; // microswitch hole separation
bl = cl + ad / 2 + (bw - ai) + hd * 3 + mhs; // bracket length
I didn't add a nut capture ala thing:30085, because I'm still trying to print simple things and I don't yet trust my printer's ability to print overhangs.
Liked ByView All
Give a Shout Out
Parametric endstop holder (mendel) by gringer is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure gringer would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).