Another Jansjo Lamp Mount For 1.5" 8020
by the_digital_dentist, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Let's you mount a Jansjo gooseneck spot lamp from Ikea on 1.5" 8020 aluminum extrusion. Simply snaps into the slot in the rail. Can be mounted horizontally or vertically. Yes, it hangs on that tightly!
Printed with ABS, 0.25mm first layer, 0.2mm remaining layers, 30% infill, no support material.
Take the gooseneck off the base that it comes with and use the screws to attach this clip. Then just snap the whole thing into the 8020...
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Another Jansjo Lamp Mount For 1.5" 8020 by the_digital_dentist is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving the_digital_dentist a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure the_digital_dentist would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).