Mendel Foot with pad for Alloy Mendel
by maza250, published
40 mm high corner foot with base pad for use with 30x30mm extrusion - in Alloy Mendel.
Insired and derived from dkennell thing16076, Alloy Mendel.It is extended in height to 40mm and has a pad on its base, with a recess for attaching a self adhesive rubber or felt pad.It has two 8mm ribs on the top face to align with slots in Alloy extrusion, it has been increased in height to allow clearance for my other designs for Ramps 1.4 plus Arduino mega holder and also my design for 12v 16A power supply holder and mounts.
Liked ByView All
Give a Shout Out
Mendel Foot with pad for Alloy Mendel by maza250 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving maza250 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure maza250 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).