Digispark Container with Lid
by AMS3000, published
I had a hard time slicing the ancestor object in Slicer for my Printrbot's 0.5mm nozzle, so I took it into Tinkercad and made the walls fatter. While I was in there, I made a lid. The resulting object works, but careful, because they fit together almost too tightly! Not sure how I will get it off :/
Print out two halves. Put your Digispark inside. Snap shut. Done. Possibly regret not having a good way to get it out againâ€¦
If you have a finer nozzle - consider using the ancestor, Digispark Board Holder/Protector.
Made with Tinkercad. Feel free to copy and do your own mix:
Liked ByView All
Give a Shout Out
Digispark Container with Lid by AMS3000 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure AMS3000 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).