by HLMAX, published
A sturdy compact slingshot for 5mm OD rubber tubing.
For sturdy construction, print using 6 perimeters, 4 solid top and bottom layers, and 30% infill.
Smooth and clean the holes for the rubber tubings with a 13/64"(5mm) drill. The slots for installing the rubber tubings may need smoothing and cleaning with a fingernail file.
Rubber tubing and pouch kit can be purchased on ebay, or DIY.
Print and use at your own risk. Play safe and use eye protection.
Liked ByView All
Give a Shout Out
SLINGSHOT by HLMAX is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure HLMAX would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).