Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Motion Sensor Oblong
by fake_tissues, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is the case for a wall-mounted motion sensor. This design includes an elongated body with a faceted face.
The top is assembled by printing two copies of the split .stl file and gluing the halves together. The bottom prints as one piece. Both segments have indents for 2x2x1mm square magnets to be glued into place.
Motion Sensor Oblong by fake_tissues is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving fake_tissues a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure fake_tissues would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).