by blincoln, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My first design, a small die in a larger die box with a working snap-fit hinge. Both dice are usable - even with one inside the other - but no guarantees about randomness.
Made to print with PLA in high resolution on e.g. a Replicator 2.
Created in Autodesks interesting (and free for now) Inventor Fusion.
This is a pretty small thing considering the working hinge - it probably has to be printed at 0.1 mm resolution (this is what I did) - or be scaled up a bit.
Update: Uploaded a slightly smaller inner die to make the die box close completely.
Die-in-a-Die Box by blincoln is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving blincoln a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure blincoln would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).