Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Architectural Dome Half
by marvins_dad, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a dome that I designed and has been constructed for a Texas Court House. Rockwall County. Hoping to continue to print/upload the rest of the section that includes the upper dome.
It takes up the entire bed of my Replicator Dual. I used rafting and 25% fill to help with the resolution. Assembled the flat pieces with super glue after everything was printed. Took about 7 hours to print.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Architectural Dome Half by marvins_dad is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving marvins_dad a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure marvins_dad would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).