Bath tap pointer caps
by AnthonyT, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
When taking a shower, it is nice to set the temperature once. These tap/valve caps can be pulled out and rotated to the correct position so that the pointer faces up to indicate the right shower temperature setting.
This fits into my 30 year old taps.
Remove the caps from your taps.
Measure with calipers and adjust the scad file.
Print two white ABS bases (which include the dot pointer).
Print one red and one blue ABS cap.
File out the holes as required so the pointer fits snugly in the cap.
Put some acetone in the seams for a great seal.
Climb into the shower and adjust the shower taps so that the temperature is just right.
Snap in the caps with the pointers facing up.
Bath tap pointer caps by AnthonyT is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving AnthonyT a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure AnthonyT would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).