by solertron, published
I designed this hinge specifically to hold an acrylic door that I designed for my 3D printer. The hinge fit and movement worked out very well. In fact better than I expected, so I am very pleased with the result.
I have included the STL files for the final design which rely on the pin side being the support on the bottom so you can remove the door at will. If you want the hinges to lock so the door will not be removable simply orient the pin side of the hinges opposite to each other. Drawing files are also supplied, and I now include a wider v2 for expanded choice. Of course, you are welcome to modify the design. Enjoy
To see the door with the hinges in place go here: http://www.thingiverse.com/thing:47899
Simply slice the supplied STLs with your favourite app and print.
BTW - The default picture shows the hinge printed with some heat sensitive ABS which changes color from aqua green to greeny yellow when held.
Liked ByView All
Give a Shout Out
Quick Hinge by solertron is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving solertron a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure solertron would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).