Electric Imp April Breakout Board
6
Likes
247
Downloads
823
Views
Published on February 6, 2013
Description
This is an enclosure for the Electric Imp April Breakout Board.
UPDATE:
I've added a top to the case with the Electric Imp logo @ .5mm so it will glow through the top of the case.
Available here:
sparkfun.com/products/11400
adafruit.com/products/1130
UPDATE:
I've added a top to the case with the Electric Imp logo @ .5mm so it will glow through the top of the case.
Available here:
sparkfun.com/products/11400
adafruit.com/products/1130
Instructions
Printed on a Replicator 2 using Makerware medium setting.
The tolerances on this print and for the board are kind of tight so you may have to clean up the print a little before it fits perfectly without getting stuck.
I've attached the Sketchup file in case you want to modify the model.
Just export the stl and run it through cloud.netfabb.com/index.php
The tolerances on this print and for the board are kind of tight so you may have to clean up the print a little before it fits perfectly without getting stuck.
I've attached the Sketchup file in case you want to modify the model.
Just export the stl and run it through cloud.netfabb.com/index.php
License
Electric Imp April Breakout Board by robertcedwards is licensed under the Attribution - Creative Commons license.
More from robertcedwards
More from Electronics
You must be logged in to post a comment.