Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Lamp base with Arduino brain control
by Kyoxilbuzz, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Customized Lamp base with LED ring, microphone, light sensor and temperature and humidity sensor.
Because i love this incredible lamp, i am trying to improved (if this is even possible...).
So, i added a couple of things:
-new lamp base holding a controllable LED ring
-Microphone in order to control the LEDs by snapping fingers (or shouting at it...up to you)
-Light sensor to control LEDs intensity (and for future automation)
-Temperature and humidity sensors (for future upgrade to adjust LED colors based on Temp and Humidity....kind of weather lamp)
The lamp will go thru different modes by snapping fingers:
-mood lamp (will change slowly colors)
-off mode (no light that is...)
I post there the below:
-Google sketch of the lamp base without decoration. But, do not try to print it yet...i kind of screw up the top of the walls (they go close to zero thickness...it's a miracle i managed to print it..)
-Arduino sketch to control the LEDs
-STL of the inside LED "bulb" + LED ring holder
-STL of the Lamp base after tinkering it on Tinkercad
Both the "final" lamp base and the bulb are availlable for modification on Tinkercad (search for Kyoxilbuzz).
As you will see, the tinkercad includes the beautiful owl from satoshi (http://www.thingiverse.com/thing:29602).
Things i will continue with this base lamp are:
-solving this thin wall thing for easier print
-make the base less basic. i have in mind of making a tree shape, and add more animals around it.
-make the electronics smaller to fit inside the base
-of course, making the flower to open automatically...as i really suck at mechanics, that might takes a while :)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Lamp base with Arduino brain control by Kyoxilbuzz is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Kyoxilbuzz a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Kyoxilbuzz would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).