by printin3d2012, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Old Fashioned Oval Pendant
Printed on a Maker Bot Thing-o-Matic.
Layer Height of 0.27
Feed Rate of 20
Object Infill of 30%
This pendant has a interchangeable jewel in the center that can be easily ejected from the pendant by using a pen to pop it out through the hole in the back.
I printed the jewel at 100% object infill, when using a semi-transparent material light shines through the jewel giving it a more realistic look.
Other pictures of this print are at this website: http://www.filaco.com/
Oval Pendant by printin3d2012 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving printin3d2012 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure printin3d2012 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).