VEND (With shorter body and smaller drums)
11
Likes
643
Downloads
931
Views
Published on February 9, 2013
Description
The VEND machine wasn't able to fit onto my 200mm x 200mm platform, and I wanted the feet to be printed on it. It is still too tall for my printer, but I plan to rebuild my printer to be taller.
The full sized drum is about 114 cubic cm. When I printed mine at 80%, I was still getting too much candy. I'm providing different size drums as well.
I do NOT take credit for creating these files, all credit goes to ErikJDurwoodII thingiverse.com/ErikJDurwoodII/designs. I've only modified them.
The full sized drum is about 114 cubic cm. When I printed mine at 80%, I was still getting too much candy. I'm providing different size drums as well.
I do NOT take credit for creating these files, all credit goes to ErikJDurwoodII thingiverse.com/ErikJDurwoodII/designs. I've only modified them.
Instructions
!!! IMPORTANT !!! IF YOU DOWNLOADED THE "VEND-Hatch Short" FILE BEFORE 2-10-13, YOU WILL NEED TO RE-DOWNLOAD THE UPDATED VERSION. The previous version DOES NOT FIT !!!
View thingiverse.com/thing:45347 for construction instructions.
If using the VEND-Body Short file, make sure you use the matching VEND-Hatch Short file.
!The drum files are only approximate volumes.!
View thingiverse.com/thing:45347 for construction instructions.
If using the VEND-Body Short file, make sure you use the matching VEND-Hatch Short file.
!The drum files are only approximate volumes.!
License
VEND (With shorter body and smaller drums) by KingRahl is licensed under the Attribution - Share Alike - Creative Commons license.
More from KingRahl
More from Kitchen & Dining
So whats the min area you think this one would work on?
The dimensions of the body are about 192 x 143 x 128mm (x,y,z). If you turn it 45 degrees on the build plate, it may fit on a smaller build platform. You'll have to watch out if you print with a border.