RepRap Y Pulley Upgrade
by dmyers7, published
This is my updated version of the RepRap Mendel Y Pulley. Designed to bring the belt teeth out beyond the stepper mount and still have plenty of pulley on the shaft to insure the rotation is true. Unique is the second part that is glued (use a little Super Glue) to cap the end of the pulley and capture the belt.
Print, Cleanup, us a dot of super glue to glue the cap on the end. Enjoy. Let me know if you have any issues. The hole for the small outline M3 nut can be a bit tight. I used a tap hammer and screw driver to set mine in the slot.
I included the Inventor Fusion file so you can edit it if you would like to.
The teeth are a bit different then the stock part and should insure no extraneous play which would lead to accuracy errors.
Liked ByView All
Give a Shout Out
RepRap Y Pulley Upgrade by dmyers7 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure dmyers7 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).