RepRap Mendal X Pulley
by dmyers7, published
The stock pulley is great, but depending on how your machine is built, .... this pulley extends the features a bit so that it is the full length of the X axis stepper drive shaft; therefore providing a truer rotation for better accuracy.
Nothing special, print and use. The slot for the M3 small outline nut is a bit small and can be opened a bit with an Xacto. I used a tap hammer and screw driver blade to set the nut into the slot. Enjoy.
I included the Inventor Fusion file for editing if useful. The model was created from my original Y Pulley so you will see many other features in the model file; more complex then it needs to be.
The teeth are a bit different then the stock part and should insure no extraneous play which would lead to accuracy errors.
Liked ByView All
Give a Shout Out
RepRap Mendal X Pulley by dmyers7 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure dmyers7 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).