School Hat Brim - Go / No Go
by whpthomas, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
According to Sun Smart guidelines, broad brim hats should have a 75mm brim and bucket hats should have a 60mm brim.
Here is a useful go / no go measure for schools and day care centres to quickly check their students' hats meet these guidelines. Each measure one has its dimension market on it, and a hole to attach to a lanyard.
I printed this with my 200 micron ReplicatorG profile thingiverse.com/thing:39050
Layer Height 0.2mm
Number of shells 1
Feedrate 80 mm/s
Travel Feedrate 150 mm/s
School Hat Brim - Go / No Go by whpthomas is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving whpthomas a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure whpthomas would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).