Kraken Laptop Stand
by eb4890, published
A classic laptop stand for a 13-inch and below laptop. Now with added giant cephalapod.
I designed it as a kraken, but it could also be Cthulu. Or an even a giant squid of some sorts.
Laser cut the dxf provided! It is designed for 4mm mdf. You need to change the slots for different materials.
Do the red lines on low power and the black on high to cut all the way through.
It etches some lines twice, so you may want to tidy up the file some more.
Liked ByView All
Give a Shout Out
Kraken Laptop Stand by eb4890 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure eb4890 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).