Jeep Door Striker Plate
1
Likes
148
Downloads
395
Views
Published on February 11, 2013
Description
This is a striker plate that should work with Best Top Doors on a CJ-5, and possibly a CJ-7.
Instructions
1. Print the latch for each side
2. Print the latches, I used 30% infill and it's holding up great
3. Align the latch on the body, allowing a small gap when the door latch is fully opened
4. Mark where the bolts will go, there is a little room for fine tuning it once it's mounted
5. Drill the two holes for the bolts
6. Mount
7. Test latch, and adjust if necessary
2. Print the latches, I used 30% infill and it's holding up great
3. Align the latch on the body, allowing a small gap when the door latch is fully opened
4. Mark where the bolts will go, there is a little room for fine tuning it once it's mounted
5. Drill the two holes for the bolts
6. Mount
7. Test latch, and adjust if necessary
License
More from ncbob
More from Automotive
You must be logged in to post a comment.