Exhaust Fan Bracket
by ark19, published
This is a exhaust fan bracket designed for Makerbot Rep 2 and a Sunon DP201A-2123HSL fan.
Print Sunon bracket.stl with 10% fill.
Print 4x lugs.stl with 20% fill.
The Sunon fan dimension is 120x120x38mm.
The fan uses M4 screws, but I only have M3 screws so this was designed with M3 clearance holes for the fan.
The lugs uses 1/4" screws.
Liked ByView All
Give a Shout Out
Exhaust Fan Bracket by ark19 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure ark19 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).