Power Switch Case
by dcgtek, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a case for a power connecter with switch we bought on EBay. Previously, the power was directly wired into the PSU, which made the whole thing a little less portable.
Now we can unplug the printer and even turn it on & off from the side.
The box has lugs either side of it to mount onto the 2020 extruded rails.
You can download the Open SCAD files and modify the setup variables to adjust the size for your particular power switch. Printed with 20% in-fill and 2 loops. YMMV
Power Switch Case by dcgtek is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dcgtek a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dcgtek would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).