Testcube: angles of your Z axis
by MLworx, published
ever printed a part and it the angles were not exactly 90Â° ?
...print this and measure your angels in ZX and ZY direction to correct it.
The cube has 60x60mm and a hole in the middle due to prevent heat expansion on the outside.
mark e.g. your front facing side of your printed cube before removing it from the printbed - otherwise you'll not be able to differ from ZX / ZY direction!!
My printed cube was not printed till the top as I wanted to determine if my fill settings are ok.
Liked ByView All
Give a Shout Out
Testcube: angles of your Z axis by MLworx is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure MLworx would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).