DC-DC Converter DIN Rail Mount
by simonx, published
These DC-DC converters are great, they are very cheap (~$3), and over 90% efficient.
I use them for powering my Raspberry Pis which I mount to a DIN rail on the end of my desk to keep them out of the way (see my RPi DIN Rail mount thingi).
After getting fed up with duct taping my DC converters to my desk I decided it was high time to design & print a DIN rail housing for them too...
I printed this at 0.15mm on my Up! Plus printer but it should print well at lower resolutions (0.2-0.3mm). The top section can be printed without a support structure but the base section will need one.
Liked ByView All
Give a Shout Out
DC-DC Converter DIN Rail Mount by simonx is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure simonx would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).