Heart Necklace Pendant
by ARGluck, published
A heart pendant I designed for my wife. It started as the basis for a heart puzzle but evolved into this. Spent way too long figuring out different ways to do it but here it is just in time for Valentines day!
Updated 2/16/13 as I realized I had uploaded an older STL. This one prints the ring much easier as it's slightly larger and better positioned.
I printed at .15mm layer height. 10% infill, and 2 shells. My prototypes varied from .30mm to 0% infill and 0-3 shells. They all worked but it all depends on your printer and how it's going to do with the ring. Just print the plate and super glue it together!
Liked ByView All
Give a Shout Out
Heart Necklace Pendant by ARGluck is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ARGluck a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ARGluck would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).