Ikea Ivar Lajban Hanger
by Peppar, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This thing allows you to suspend the Ikea LAJBAN drying rack on the side of an Ikea IVAR shelf.
Print two of ivar-lajban-hanger.stl, mount as in the picture. Optionally fix with 2xM3 25mm screws, 2xM3 washers and 2xM3 nuts.
Note: It uses the springiness of the PLA to "lock" the drying rack in place. Harder plastics might require modifications. Modify "HangerOrig" in the Blender file, duplicate it and apply all the boolean operations for a nice STL file output.
Ikea Ivar Lajban Hanger by Peppar is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Peppar a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Peppar would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).