Space Navigator Cover
by Kalibre46, published
This is a cover to fit the Space Navigator 3D mouse when it's not in use.
The Space Navigator 3D mouse by 3DConnexion is a great bit of kit and has a lovely bright blue LED ring in the base. What isn't so lovely is trying to get to sleep with that bright blue LED ring in the same room if you happen to have it in a bedroom and leave your PC/Mac switched on overnight.
To get around this issue I created a nice little hat for it. It also contains a little notch for the cable to go through.
This has been designed in Solidworks and I've included the original file for people to tinker with as they wish. I've printed the cover on my Rep2 at 0.2 layer height with 20% infill and 2 additional shells with great results.
You will need supports. I've tried printing it upside-down with external supports and also the correct way up with internal supports. Both work however I suggest using the internal supports because it doesn't affect the shell quality (as pictured).
Liked ByView All
Give a Shout Out
Space Navigator Cover by Kalibre46 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Kalibre46 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Kalibre46 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).