Bruder Multi Terrain Loader drive sprocket
5
Likes
176
Downloads
2055
Views
Published on February 14, 2013
Description
Custom drive sprockets for RCing the Bruder Multi Terrain Loader.
Instructions
For those interested in RCing Bruder toys, these sprockets can go a long way to helping the process.
These sprockets are for the Bruder model in this link:
brudertoys.com/en/usa/range/range-and-series/professional-series/farming/?tx_sortiment_pi1%5Bartnr%5D=02136&tx_sortiment_pi1%5Baction%5D=details
Support not required, simply trim off the tabs.
Drill out the center hole 4mm for the stock shaft or to whatever size shaft your using to drive the sprocket. Glue the sprocket to the shaft or use the sprocket with holes provided for 3mm set screws.
Figuring out the rest of the Bruder conversion is up to you. have fun!
These sprockets are for the Bruder model in this link:
brudertoys.com/en/usa/range/range-and-series/professional-series/farming/?tx_sortiment_pi1%5Bartnr%5D=02136&tx_sortiment_pi1%5Baction%5D=details
Support not required, simply trim off the tabs.
Drill out the center hole 4mm for the stock shaft or to whatever size shaft your using to drive the sprocket. Glue the sprocket to the shaft or use the sprocket with holes provided for 3mm set screws.
Figuring out the rest of the Bruder conversion is up to you. have fun!
License
Bruder Multi Terrain Loader drive sprocket by outcastrc is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from outcastrc
More from R/C Vehicles
You must be logged in to post a comment.