Cable tearing to pieces? This is a quick fix to prevent the cable skin from shredding further.
+Print with Raft.
+Support is not necessary, but keep it on for safe print.
+Standard settings etc.
to keep in mind when using this repair kit:
//The repair kit fit the cable tightly, remove gently only if necessary.
//Model scale is ready for print. No further scaling required.
// Made to share, Non-commercial
Resolution Standard, 5% - 10% infill, 0.2mm layer height, 90 mm/s extruding speed and 150 mm/s traveling. Standard Setting from MakerBot