50MM Fan duct for Prusa mendel V2 x-carriage and j-head
by jininjin, published
50MM Fan duct for Prusa mendel V2 x-carriage and j-head.
I have not printed this, so print at your own risk. The model is a bit polygonal but this should work just fine. I made a quick test model for sizing the nozzle to your printer (this is a cross section of the nozzle and the mount)
Liked ByView All
Give a Shout Out
50MM Fan duct for Prusa mendel V2 x-carriage and j-head by jininjin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure jininjin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).