Wade's extruder to bowden cable, for every hole
3
Likes
210
Downloads
590
Views
Published on February 15, 2013
This thing can be customized with MakerBot Customizer!
Open in Customizer
Description
I made this part to check customizer and play with openscad.
It is based on this: thingiverse.com/thing:36240 from Petehagoras
The dimensions for the holes are taken from jonaskuehling's openscad model thingiverse.com/thing:18379 (Greg's Wade reloaded)
The dimensions are tight, so i don't know if it will work out of the box.
I didn't check if already existed for every hole.
I'm not familiar with licences so i'll keep the original.
It is based on this: thingiverse.com/thing:36240 from Petehagoras
The dimensions for the holes are taken from jonaskuehling's openscad model thingiverse.com/thing:18379 (Greg's Wade reloaded)
The dimensions are tight, so i don't know if it will work out of the box.
I didn't check if already existed for every hole.
I'm not familiar with licences so i'll keep the original.
Instructions
Go to customizer and select your filament and the mounting hole your extruder has.
If you print it before me, leave some feedback :)
If you print it before me, leave some feedback :)
License
Wade's extruder to bowden cable, for every hole by cr3a7ure is licensed under the Attribution - Creative Commons license.
More from cr3a7ure
More from 3D Printer Extruders
You must be logged in to post a comment.